Availability: 162 In Stock

About Hologram HTV 

Hologram heat transfer vinyl creates stunning, reflective rainbow effects to take your HTV designs to the next level. We manufactured our premium holographic heat transfer vinyl to be ultra- reflective, giving you the power to create three-dimensional prism-like effects and brilliant, eye-popping designs that never go unnoticed. With so many colors to choose from, you will love everything you can do with our hologram HTV. This material can also be used to create a rhinestone effect.

*Actual sheet size can be up to 1/4” shorter than stated sheet size due to manufacturing specifications

How to Apply Hologram HTV

Mirror your design. Place shiny side down on your mat.

Once you have cut and weeded your heat transfer vinyl design, it is time to apply it. Our hologram HTV is very easy to work with and perfect for any home or professional crafter. You can use a heat press, home iron or EasyPress to properly adhered our hologram heat transfer vinyl.

Home Iron: 

  • Set your iron to the highest setting and firmly press your design for 15 seconds. No steam. Don't slide your iron, instead apply firm pressure in sections until your design is adhered.
  • Give it time to cool before removing carrier sheet.
  • Cover your design with Teflon sheet, parchment paper or a thin towel and do a final press for at least 15 seconds.

Heat Press:

  • Set heat press between 305 and 310 degrees (this may vary as every heat press is different).
  • Press design for 10 seconds. When doing layers, press the first layers for 5-6 seconds before pressing last layer for full 10 seconds. Be sure to always cover any exposed HTV with a Teflon sheet, parchment paper or thin towel
  • Matte HTV is a cold or warm peel when using heat press. However, when working with a lot of layers, do a cold peel.
  • Cover your design with Teflon sheet, parchment paper or a thin towel and do a final press for 10 seconds.


  • Set your EasyPress to the proper setting for your project by adjusting the time and temperature using the +/- buttons. Use Cricut’s guide to help you out.
  • The orange light indicates your machine is heating up. Once it is green, it is ready to use.
  • Preheat your project material. Then apply your design. 
  • Place EasyPress on your HTV design and press the Cricut button to start timer. Hold in pace and use pressure until it beeps.
  • Flip project material and repeat on the backside of design.
  • Matte HTV is a cold or warm peel

Washing and Drying instructions for Hologram TV:

  • Allow your design to set on your garment for 24 hours before washing. HTV needs enough time to cure to ensure it is adhered.
  • Turn garment inside out before washing.
  • Do not use bleach or fabric softeners. Use a gentle detergent.
  • Wash in cold or warm water.
  • Dry flat or hang to dry.
  • Do not iron directly on to the HTV once applied.

No Content

You Also Might Like

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page